Home » Service » Installation Instructions » Use Precautions of Cylinder Liner

1.Every part of the cylinder liner should be cleaned and every hole is not blocked.
2. The external surface of the liner should be coated with clean lubricating oil.
3. Every liner is pressed into the corresponding bearing saddle bore of the machine by installation tools. Generally the outer end face of the liner should be paralleled with that of the saddle bore. The oil hole on the liner should be precisely against the hole of the oil line on the bearing saddle bore and the deviation should be not more than 1mm.
4. If it leaves some space, the liner should be bored or shaved after being installed into the bearing saddle bore. When the liner is installed with accessories after cleaning, some space should be left for flexible movement.